E8 on the wine cooler: the middle zone frosting probe has a short circuit.
Model compatibility: Bertazzoni reuses codes across series and model years, so E8 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Bertazzoni's wine cooler manual defines E8 as a short circuit on the middle zone frosting probe.
A wine cooler showing E8 is reporting a shorted frosting probe in its middle zone.
Decoding the number
The manual groups its probe codes in pairs: the odd number stands for an open circuit and the even number right after it for a short circuit. E8 is the even half of the middle zone frosting pair, so it reads as middle, frosting, short. The lower zone frosting pair is E11 (open) and E12 (short).
What you will notice
The buzzer sounds three tics in succession.
The code appears on the display and flashes once every ten seconds.
The alarm repeats until it is released with the on/off key.
One tic on an ordinary key press is just the normal key sound.
Owner action
The manual lists no reset and nothing for the owner to check. It says repair of the fault is a job for a service technician.
Where E8 sits among the frosting probe codes
Upper zone: E3 and E4. Middle zone: E7 and E8. Lower zone: E11 and E12. Reading E8 therefore gives middle, frosting, short. Bertazzoni’s table has six probe groups and twelve codes in total.
Wine cooler service in Los Angeles
Bertazzoni wine cooler service in Los Angeles is available on (310) 987-4514. When you call, mention that E8 is on the display and read out the model number from the nameplate. You can also look at the refrigerator repair page.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Bertazzoni appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Cooling loss is a symptom, not a diagnosis. A useful refrigerator visit separates airflow, defrost, sensing, door sealing and sealed-system faults before…
