Bertazzoni Dishwasher E1 Error Code

What E1 is timing

The first thing a dishwasher cycle does is bring in water, and the fill is timed. Three Bertazzoni models carry this code in their manuals (DW24XV, DW24PR, DW18PR). E1, which some lists print as E01, appears when 4 minutes of inlet pass and the flow meter has still not counted the defined water amount.

Possible causes for owners

One line of the owner-level table covers three possibilities:

1. a shut faucet
2. a restricted intake of water
3. pressure that is too low

The DW24PR display also has a water failure light among its status indicators, and it stands for a closed faucet.

First step

Check the supply line’s shut-off valve and turn it fully open, then run the cycle once more.

If E1 persists

For service, the manual prints seven things to check. They run from the water supply through the inlet valve and the inlet to the flow meter, then the pressure switch, the drain and finally the PCB.

Related codes

• E4: water has escaped into the base instead of too little arriving
• F2: water that fails to drain on the newer models
• FF: the F-code table’s version of an inlet failure

Questions about E1

Is E1 the same as E01? Yes, some listings simply print it with a leading zero.

Which models carry it? The use and care manuals for the DW24XV, DW24PR and DW18PR.

Can an owner go past the valve? The owner-level table stops at the three causes, and the seven-item list is a matter for service.

Dishwasher repair in Los Angeles

With the valve open and E1 still lit, call (310) 987-4514 about Bertazzoni dishwasher service in Los Angeles. Tell us what you already tried; the dishwasher repair page has the appliance details.

Source: Bertazzoni DW24XV Use & Care Manual; Bertazzoni DW24PR Use & Care Manual; Bertazzoni DW18PR Use & Care Manual